Manual

62 Chapter 4 Autel Enterprise App
EVO Max 4T User Manual
2) Confirm aircraft status and route preview data.
3) According to the different types of route missions, set the corresponding flight
parameters. If not set, the "Return-to-Home Altitude", "Distance Limit", "Height Limit",
"Home Point Setting", and "Remote Controller" settings are based on general settings,
please refer to "4.3.1 Flight Control Parameter Settings" and "4.3.3 Remote Controller
Settings".
4) Select to enable or disable obstacle avoidance.
5) After confirming that the above operations are completed, click the "Execute" button.
4.11.2 Waypoint Missions
On the Shortcut Toolbar, click " " to enter the "Waypoint Mission" interface. Users can
add multiple waypoints on the map, every two waypoints connect to form a flight segment, and
one or more flight segments form a route. By setting the flight altitude, flight speed, camera
action, and waypoint actions of each waypoint for each route and each waypoint, the aircraft
will automatically fly according to the route and perform corresponding actions at each
waypoint, such as Figure 4-17 and Figure 4-18.
If any of the following conditions are detected, the flight mission will end automatically, and
the aircraft will perform other operations according to the following conditions.

Low battery power: A notification will pop up on the App interface to inform you that the
aircraft will return to home automatically.

Critically low battery power: The aircraft will end its mission and automatically land at its
current position.

During a flight mission, if the remote controller is suddenly powered off or automatically
shuts down due to low battery, the drone will execute the Lost Action set by the user.