Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
Chapter 4 Autel Enterprise App 61
EVO Max 4T User Manual
11 Horizontal Speed Refers to the current horizontal speed of the aircraft.
12
Aircraft Battery
Level
The edge of the attitude ball shows the current battery level of
the aircraft (the color indicates the battery level of the aircraft,
which is consistent with the battery level in the overview
settings, please refer to "4.3.5 Battery Level of the Aircraft").
4.11 Route Missions (Toolbox)
4.11.1 Pre-Flight Inspection
Before the aircraft starts to execute a mission, Pre-Flight inspections are required. On the
"Pre-Flight Check" interface, the user can preview the current status of the aircraft (such as:
battery power, battery temperature, SD card memory, etc.), route data, with additional settings
such as flight parameters and obstacle avoidance settings.
Figure 4-16 Aircraft Mission Pre-Flight Inspection
1) On the ongoing route mission interface, click " " on the left, and the "Pre-Flight
Inspection" prompt will pop up. Please make sure that there is no fault alarm, otherwise,
you need to follow the fault tips to solve it.