Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
Chapter 4 Autel Enterprise App 49
EVO Max 4T User Manual
under the functions to adjust the gimbal, so that the horizontal and vertical axes on the screen
remain aligned to the reference objects on the image transmission screen.
Reset gimbal parameters
Click the "Gimbal Parameters Reset" button, and then click the "Confirm" button to reset
the gimbal parameters.
4.3.7 More
Click " " to enter the "More" interface, the user can set the units, lighting, visual
positioning, language, etc., as shown in Figure 4-8.
Figure 4-8 "More" interface
Units Settings
Click "Units Settings", and then click the drop-down lists of "Speed / Distance Units", "Area
Units", "Temperature Units", and "Coordinates" to set the unit according to your needs.
Light Settings
Click "Light Settings" to set "Stealth Mode", "Night Mode", and toggle the "Auxiliary Bottom
Light"
Turn on/off stealth mode
Click "Stealth mode" to turn on or off stealth mode. If this function is enabled, the arm
lights and beacon will be turned off by default. When flying at night, please turn on the beacon
to ensure flight safety.
Turn on/off the beacon
Click "Beacon" to turn on or off the beacon on the top of the fuselage.