Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
44 Chapter 4 Autel Enterprise App
EVO Max 4T User Manual
Figure 4-3 "Obstacle Avoidance Settings" interface
Turn on/off the obstacle avoidance system
Click "OA system" to turn on/off the Obstacle Avoidance system. If OA is enabled, the user
can set the stop distance. Enter value in the edit box on the right of stop distance (1-10m), or
adjust the value by sliding the buttons below left and right. If the aircraft detects obstacles, it
will stop at the stop distance as set.
If the obstacle avoidance system is turned off, when the aircraft encounters an obstacle, it
will not stop.
Set Warning Distance
Enter values in the edit box on the right of "Warning Distance (1-20m)", or slide the buttons
below left and right to adjust the values.
Turn on/off Radar Display
Click the button on the right side of "Radar Display" to enable or disable this function, and
the flight interface will display/not display reminders when reaching the warning distance, if
this function is disabled, the reminder will turn off accordingly.
Turn on/off the obstacle sound prompt function
Click to enter the button on the right side of "Obstacle Detection Notification Sound" to
enable or disable this function. When this function is enabled, the aircraft will make a sound
notification when detecting obstacles.