Manual

Chapter 4 Autel Enterprise App 43
EVO Max 4T User Manual
 Turn on/off the distance limit function
Click the button on the right side of "Distance Limit" to enable or disable the distance limit
function.
 If this function is turned on, enter the limit value in the edit box of "Limit (20-5000)" that
pops up below, and the aircraft will fly as far as this distance.
 If this function is turned off, the aircraft can keep moving according to the user's
operation until the battery is exhausted.

Using the aircraft in an unsuitable flight environment (such as a flight altitude exceeding
120 meters) may have legal risks. Please comply with local laws and regulations when
flying the aircraft. For details, see "
5.2 Flight Precautions'' in Chapter 5 First Flight.

Reasonably setting the altitude limit and distance limit can increase the safety factor.
 Set flight speed mode
Click the "Speed Mode" drop-down list, and then select the appropriate mode from
Smooth, Standard, and Ludicrous, that is, set the default speed mode every time you open the
Enterprise App. For the meaning of each mode, please refer to "1.3.2 Speed Modes".
 Set the Home point location
Click on the right side to select the home point.
 If "Aircraft" is selected, the Home Point is the position where the aircraft took off this
time.
 If "RC" is selected, the Home Point is the current position of the remote controller.
 Calibrate Compass, IMU
Please refer to "6.2.1 Compass Calibration" and "6.2.2 IMU Calibration" in Chapter 6
Firmware Update and Maintenance.
 Set Lost Action
Click the drop-down list of "Lost Action" to set the aircraft actions when disconnected. Lost
action refers to the action that the aircraft will perform when the aircraft is disconnected from
the remote controller.
 If you select "RTH", when the aircraft disconnects, the aircraft will automatically return
to the home point.
 If "Hover" is selected, the aircraft will hover at the current position when the aircraft
disconnects.
 If "Land" is selected, the aircraft will land at the current position when the aircraft
disconnects.
4.3.2 Obstacle Avoidance Settings
Click " " to enter the "OA Settings" interface, the user can set the OA system, stop
distance, alarm distance, radar display and obstacle sound alert of the aircraft, as shown in
Figure 4-3.