Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
34 Chapter 3 Smart Battery
EVO Max 4T User Manual
3.2.2 Turn On/Off The Battery
Turn On The Battery
Before installing the battery, make sure it is turned off. After installation, press and hold
the power button for 3 seconds to turn on the battery.
Turn Off The Battery
Press and hold the power button for 3 seconds to turn off the battery. If the battery is
installed in the aircraft, LED1 and LED4 will flash 5 times to indicate that the aircraft is shutting
down. Remove the battery from the aircraft after all battery level indicators are off.
3.2.3 Check Battery Level
When the battery is off, short press the power button for 1 second to check the battery
level, and the LED will display the current battery level.
Table 3-4 Battery level indicator status (not charging)
: Green Light : Green Light Flashing : Off
After the aircraft is connected to the remote controller, users can check the current
battery status of the aircraft in the status notification bar at the top of the Autel Enterprise
App, or jump to the "Aircraft Power" page of the Autel Enterprise App to
view more
information. Please refer to Chapter 4 "4.3.5 Battery Level of the Aircraft" and "4.4 Status
Notification Bar" for further details.