Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
Chapter 3 Smart Battery 33
EVO Max 4T User Manual
3.2 Battery Operation Instructions
3.2.1 Installing/Removing the Battery
Table 3-2 Battery Installation
Step Reference
1)
Please turn off the battery
before installing the battery.
2)
Insert the battery into the
battery compartment, and
you will hear a clicking sound
when the battery is in place.
If the battery is not installed properly, it may cause the battery to fall off during the flight,
damage the aircraft or even cause personal injury.
Table 3-3 Battery Removal
Step Reference
1)
Turn off the aircraft battery
before removing the battery.
2)
Press and hold the buckles
on both sides of the battery
and slowly pull out the
battery.