Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
30 Chapter 2 Remote Controller
EVO Max 4T User Manual
25m< distance from the Home
point≤50m
If the current aircraft altitude is lower than 30m, the
aircraft will ascend to 30m altitude and return;
If the current altitude of the aircraft is higher than 30m,
the aircraft will return to home at the current altitude.
Distance from Home > 50m
If the flight altitude is lower than the set return-to-home
altitude,the aircraft will ascend to the return-to-home
altitude;
If the flight altitude is higher than the set return-to-home
altitude, the aircraft will return to home at the current
altitude.
2.4.5 Turn On/Off the Remote Controller Prompt Sound
In some scenarios, the remote controller will send out prompts, such as power-on, low
battery of the remote controller, obstacle reminder, etc.
Users can set the sound on the remote controller main interface ("Settin
gs" >
"Sound").
2.5 Autel SkyLink Image Transmission Function
EVO Max 4T is equipped with Autel SkyLink 3.0 image transmission technology, 4 image
transmission antennas, 2 channels of transmitting signals, and 4 channels of receiving signals,
so that the communication distance between EVO Max 4T and the remote controller can reach
up to 20 kilometers.
It supports adaptive frequency hopping transmission of multiple frequency bands,
selects the optimal channel according to the electromagnetic interference situation, and
has strong anti-interference ability.
The quality of real-time transmission reaches 1080p/60fps, and it has a high
transmission bit rate of 64Mbps and low-latency transmission characteristics.
The whole link data storage adopts AES-256 encryption method to ensure that the
communication data between end-to-end cannot be monitored.
The transmission data is based on the remote controller and comes from test data, and
the test environment and conditions are different, and the data may be different.