Manual

28 Chapter 2 Remote Controller
EVO Max 4T User Manual
2.4.3 Custom Keys C1, C2
In the "Settings" > "Remote Control" > "Remote Controller Custom Key" interface, users can
customize the settings of C1 and C2 keys. Please refer to Chapter 4 "4.3.3 Remote Controller
Settings".
Table 2-12 C1, C2 Customizable Settings
No. Mode Description
1
Visual obstacle
avoidance on/off
Press to trigger: Turn on/off the visual obstacle avoidance
system. When this function is enabled, the aircraft will
automatically hover when it detects obstacles in the field of
view.
2
Gimbal
recentering/45°/facin
g down
Press to trigger: switch the gimbal angle.
Gimbal return to center: the gimbal heading angle returns to
the center from the current position to be consistent with
the heading of the aircraft nose, and the gimbal pitch angle
is returned to the 0° direction from the current angle;
Gimbal 45°: The heading angle of the gimbal returns from
the current position to be consistent with the heading of the
aircraft nose, and the pitch angle of the gimbal returns to
the direction of 45° from the current angle;
Gimbal facing down: The gimbal heading angle returns from
the current position to be consistent with the heading of the
aircraft nose, and the gimbal pitch angle is rotated from the
current angle to a 90° direction.
3
Map/image
transmission
switching
Press to trigger: switch map/image transmission view.
4 Speed Mode Switch
Press to trigger: switch the speed mode of the aircraft,
please refer to "1.3.2 Speed Modes".

When the Ludicrous mode is turned on, the visual obstacle avoidance system will be
turned off. It is recommended to use the aircraft in an open area and perform flight
operations with caution.
2.4.4 Automatic Takeoff/Return, Pause

If the vision system is disabled during a return flight, the aircraft will not be able to
automatically avoid obstacles. Long press the pause button " " on the remote controller
to exit the automatic return-to-home function and regain control of the aircraft.

If the Home point is not suitable for the aircraft to land (such as uneven ground, crowds,
etc.), please press and hold the pause button " " on the remote controller to pause the