Manual
Table Of Contents
- Chapter 1 Aircraft
- Chapter 2 Remote Controller
- Chapter 3 Smart Battery
- Chapter 4 Autel Enterprise App
- Chapter 5 First Flight
- 5.1 Instructions for First Flight
- 5.2 Flight Precautions
- 5.3 Pre-Flight Preparations
- 5.3.1 Unpacking
- 5.3.2 Charging
- 5.3.3 Preparing the Aircraft
- 5.3.4 Installing/Removing Propellers
- 5.3.5 Preparing the Remote Controller
- 5.3.6 Login, Pairing, Activation (activation only upon first use)
- 5.3.7 Novice Guide (first time use only)
- 5.3.8 Reconnect the aircraft (not required by default, required after disconnection)
- 5.4 Pre-Flight Inspection
- 5.5 Basic Flight Process
- Chapter 6 Firmware Update and Maintenance
- Appendix A Product Specifications
26 Chapter 2 Remote Controller
EVO Max 4T User Manual
Mode 2
Figure 2-10 Mode 2
Table 2-9 Mode 2
Stick Move Up/Down Move Left/Right
Left Stick
Control the ascent and descent of
the aircraft
Control the heading of the aircraft
Right Stick
Control the forward and backward
movement of the aircraft
Control the left or right movement of
the aircraft
Mode 3
Figure 2-11 Mode 3
Table 2-10 Mode 3
Stick Move Up/Down Move Left/Right
Left Stick
Control the forward and backward
movement of the aircraft
Control the left or right movement of
the aircraft
Right Stick
Control the ascent and descent of
the aircraft
Control the heading of the aircraft
2.4.2 Set Command Stick Modes
The layouts are divided into Mode 1, Mode 2, and Mode 3. You can set the input mode
according to your preference. Please refer to Chapter 4 Autel Enterprise App "4.3.3 Remote
Controller Settings". The factory default control mode of the remote controller is "Mode 2".