User manual

57
1.
Find the desired position for landing the aircraft.
2.
When the aircraft reaches the target position, release the Command Sticks to
let it hover.
3. Push the Left Command Stick downwards slowly to land the aircraft.
 Shutting down the motors
Choose one of the following methods to shut down the motors after the aircraft
reaches the ground:
OR
Push the Left Command Stick to the
bottom and hold for 2s
Hold both Command Sticks toe-in
for 2s
 Automatic Landing
Press the Take-off/Landing Button ( ) on the remote control to land the aircraft
automatically from its current hover position.
1.
Navigate the aircraft to the target landing position.
2.
Release the Command Sticks and let the aircraft hover.
3.
Press and hold the Take-off/Landing Button ( ) for 2 seconds until you
hear a beep from the remote control.
4.
The aircraft will descend, land and shut off its motors automatically. During
descent, you can adjust the aircraft position using the Right Command Stick.
TIPS
During the automatic descent process, you can regain control by pressing
the Pause Button ( ) on the remote control.
NOTES
• Automatic landing is also available in ATTI mode ( 12). However, the
aircraft may drift in this mode, so you should monitor its altitude.