User manual

The remote control and aircraft come paired out of the box. When you need to pair

them again — such as after pressing the Remote Control Pairing Button on the

aircraft — follow these steps:

1. Turn off the remote control.

2. Remove the gimbal guard first, and

then turn on the aircraft .

Press and hold the Remote Control

Pairing Button on the lower right

side of the aircraft for 3 seconds. The

Pairing Indicator will flash quickly,

indicating the aircraft is ready to pair

with the remote control.

Simultaneously press and hold the

Power Button ( ) and Go Home

Button ( ) simultaneously for 2

seconds until “Autel” appears on the

Flight Information Panel. The

Pairing Indicator on the aircraft will

turn off once pairing is successful.

To pair a secondary remote control,

simultaneously press the Power

Button and Customizable Button

B until "Autel" appears on the

Information Panel.