User manual

41
Move forward
Move backward
Move left
Move right
2. Remote Control Calibration
For detailed calibration instructions, see Section 3.2.3 ( 42).
 Vision Settings
Access these settings to turn Visual Obstacle Avoidance on/off and select
Show Radar Map.
 General Settings
1. Language: Select the displayed language.
2. Units: Choose the unit of measurement displayed in Flight Control Settings:
Metric (m/s), Metric (km/h) or Imperial.
3. Format SD Card: Use this to ensure that your SD card is in an acceptable
format.
4. Reset Camera: Use this to restore all the camera settings to default.
2.2.3 Remote Control Buzzer Alerts
The table below describes the various buzzer alerts and their corresponding
meanings.
Remote Control Buzzer Alerts
Aircraft Low Battery Warning
(Default 25%)
1 quick beep every second for 5s, with 2
remote control vibrations
Aircraft Critically Low Battery Warning
(Default 15%)
5 quick beeps every second for 5s, with
5 remote control vibrations
Remote Control Low Battery Warning
(10%)
1 quick beep every second for 5s
Remote Control Critically Low Battery
Warning (5%)
5 quick beeps every second for 3s, with
two remote control vibrations
Aircraft & Remote Control
Communication Lost
2 quick beeps every second for 5s, with 1
remote control vibration
Video Link Disconnected
3 quick beeps in 1s