User manual

32
NOTE
 Omnidirectional obstacle sensing directions include front, rear, top,
bottom, left, right. However, there might exists some blind spots in the
four diagonal directions. When manually flying, please pay attention to
the surrounding environment and APP tips to ensure safety.
 Please do not fly in an environment with insufficient light, complex area
with small objects (such as small branches, wires, nets), moving
objects, transparent surfaces (e.g. windows) or reflective surfaces (e.g.
mirrors).
 When following a car or other vehicles, please drive on off-road or
closed routes. Never use on public roads.
 Prerequisites
 Ensure that the aircraft is in GPS or visual positioning mode.
 Wait until the flight LED indicators are either slow flashing green or double
flashing red before taking off.
 Exercise increased caution while flying if the GPS signal is weak or visual
positioning requirements cannot be met — for example: when around surfaces
with little visible texture or when flying at an altitude of over 12 meters (36 feet).
 The binocular vision sensing systems and Starpoint™ Positioning System
are affected by the brightness and texture of the surfaces over which the aircraft
is flying. Avoid flying over surfaces that are:
˗ Monochromatic