User manual

with the aircraft, flight log data (including flight telemetry) will be uploaded and maintained on Autel
Robotics data servers. All telemetry and flight logs are stored on data servers located within the
boundaries of the continental United States, and the data upload occurs automatically only if the Flight
Log Backup option is enabled.
The Autel Robotics customer support team doesn’t have access to flight log data except when explicitly
granted permission by the user via the Autel Explorer
TM
app. When that permission is granted, only
flight logs within the selected date range can be accessed.
Information, including still and motion imagery and data from the aircraft’s sensors, will be stored on the
aircraft's internal drive. If your aircraft ever needs to be sent to us for service, the information on the
internal storage unit may be used to diagnose problems with the aircraft. The information will not be
retained except as required to perform the service or repair. Do not remove or alter the data on the
internal storage device in any way. Doing so will invalidate all warranty coverage.
Autel Robotics’ purpose in gathering data is to provide support and service for our customers, and to
improve the performance of our products. We take your privacy as seriously as we do our own. We will
consent to the disclosure of uploaded data only when required by law to do so.
Safety Instructions
Battery Safety
The EVO Ⅱ is powered by a lithium-polymer battery. The misuse of Li-Po/Li-Ion batteries can be
hazardous. As such, make sure to strictly follow all the battery usage, charging and storage instructions
below.
WARNING!
• Only use batteries and charging devices that came with the aircraft or are sold by Autel
Robotics for use with the EVO Ⅱ. Do not tamper with the battery pack or its charger.
• Battery electrolytes are highly corrosive. If any electrolyte comes in contact with your skin or
your eyes, immediately flush the affected area with clean running water and seek medical
attention.
Battery Usage
Always turn off the aircraft before installing or removing the battery. Additional information:
• Only use batteries and charging devices that came with the aircraft or are sold or authorized by Autel
Robotics for use with the EVO Ⅱ. Using unapproved batteries or charging devices may result in fire,
explosion, leakage, or other hazards. Autel Robotics will not be liable for any consequences
resulting from the use of third-party batteries or charging devices.
• Do not disassemble, open, crush, bend, deform, puncture, shred, or otherwise intentionally cause
damage to the battery. Doing so may result in fire, explosion, leakage, or other hazards.
• If the battery starts to swell, smoke, leak, or show any signs of damage, stop using or charging it
immediately and submerge it in a container of saltwater.
• Do not expose the battery to temperatures below -10°C (14°F) or above 40° C (104°F). Exposing the
battery to extreme temperatures will reduce its lifespan and may result in fire, explosion, or other
permanent damage.
• Temperatures below 5°C (41°F) will cause the battery to discharge faster.
• Do not use the battery in strong electrostatic or electromagnetic environments.
• Do not expose the battery to fire, explosions, or other hazards.
• If the aircraft becomes submerged, remove the battery immediately after you retrieve it. Leave the
battery in an open area, away from flammable objects, and maintain a safe distance until it is
completely dry. Don’t use the battery again. Contact our customer support team for a replacement.
Battery Charging