User manual

29
Button ( ).
B. When the aircraft's battery level reaches the 25% threshold, you’ll receive a
Low Battery Warning and Failsafe will be activated, after which the aircraft will
automatically return home. If you retake control of the aircraft, you’ll receive a
Critically Low Battery Warning when the battery reaches 15%, and the aircraft
will automatically land in its current position. If landing in the current position may
result in an emergency, you can press the Pause Button ( ) to halt the
landing and fly it to the nearest possible safe landing site.
NOTES
• If the aircraft is within 50 horizontal meters (150 feet) from the home point
when your aircraft battery level reaches 25% (Low Battery Warning), the
aircraft will not perform the Go Home procedure.
• If GPS is unavailable when Failsafe is activated during a Low Battery
Warning, the aircraft will not execute the Go Home procedure. Instead,
the aircraft will enter ATTI mode and stay in your control. The aircraft will
proceed to land automatically only when the battery reaches 15%
(Critically Low Battery Warning).
 Landing Features
 Landing Protection
When the aircraft arrives above the home point, Landing Protection functionality
will detect the ground conditions below. The aircraft will land automatically if the
ground is level and flat. If not, it will hover at the current location to wait for the next
command.
 Accurate Landing
The aircraft will scan and match the terrain features if Accurate Landing function
is active, it will land as close as possible to the takeoff point once the current terrain
matches the takeoff point terrain.
IMPORTANT
• The aircraft records the takeoff point as the default home point. Accurate
Landing is available only when the home point has not been refreshed
during the flight.
• Choose an open and well-lit area (such as a lawn) as your takeoff point.
• When Accurate Landing is preparing to land the aircraft, make sure that
conditions at your takeoff point haven’t changed.