User manual

28
it will return automatically and land at the current home point.
The EVO Ⅱ can detect and avoid obstacles on its flight path using its Forward
Vision System. The remote control’s function will be disabled while the aircraft is
in GO HOME, but you can reactivate it by pressing the Pause Button ( ).
WARNING
If the Forward Vision System is not enabled during the Go Home period,
the aircraft will not automatically avoid obstacles. Press the Pause Button
( ) on the remote control to exit the Go Home feature and regain control
of the aircraft.
IMPORTANT
• The default Go Home altitude is 30 meters (90 feet). If you activate Go
Home when the aircraft is at an altitude lower than that, it will rise to 30
meters (90 feet) before returning home. Learn how to adjust the Go Home
altitude in the App Manual.
• If the Go Home function is activated within a 10-meter (30-feet) radius of
the home point, the aircraft will automatically descend and land.
 Failsafe
The Failsafe function is designed to help the EVO Ⅱ automatically return home or
land in its current position when necessary. Failsafe will be activated in the two
situations described below.
 Communication Lost
Failsafe will be activated if communication is lost between your aircraft and remote
control for 3 seconds.
If GPS is available when the Failsafe function is activated, the aircraft will
automatically use the Go Home function. Otherwise, it will land from its current
position. When communication is restored, you can still press the Pause Button
( ) to regain control of the aircraft.
 Low Aircraft Battery Level
Failsafe will also be activated in either of the following low battery conditions.
A. The aircraft continually calculates the battery level required for the aircraft to
return to the home point. If the battery level reaches the minimum level required
for the aircraft to return to the home point, a notice will appear on the Autel
Explorer
TM
app. Failsafe will be activated and the Go Home process will be
initiated. Again, you can regain control of the aircraft by pressing the Pause