User manual

15
R - Solid Light
Calibration is failed
Gesture Commands
R - Fast Flashing
Gesture command has been received
2.1.3 Aircraft Battery
The EVO Ⅱ’s all-new, custom-designed rechargeable Li-Po battery features high
energy density and capacity. It should be charged exclusively using the supplied
charger.
 Basic Functions
1
Aircraft Battery
① Removal Button
② Battery Level Indicators
③ Power Button
3

Turning On the Battery
Make sure the battery is off before attaching it to the aircraft. After attaching it, press
and hold the Power Button for 3 seconds. The battery level indicators will display
the current battery level.
 Turning Off the Battery
Press and hold the Power Button for 3 seconds to turn off the battery. If the battery
is attached to the aircraft, the LED 1 and LED 4 will flash 5 times to indicate that the
battery is turning off. Once all Battery Level Indicators have turned off, remove
the aircraft battery from the aircraft.
 Checking the Battery Level
To check the battery level without powering it on, press the Power Button for 1
second, and then release it quickly. The LEDs will display the current battery level
as shown below.