User manual

31
4. Adjust the antennas
Extend the antennas of the remote controller. The strength of the signal received by
the antennas varies depending on their positions. The strongest signal can be
achieved when the antennas and the back of the remote controller form an angle of
180° or 270° degrees and the flat side of the antennas is facing the aircraft. When
you operate the aircraft, make sure that the aircraft is in the place for the best
communications.
Note
 Do not use other communication devices of the same frequency band at the
same time to prevent interference with the signals of the remote controller.
 In practice, when the image transmission signals are weak, the Autel Explorer
App will display prompt messages. Adjust the antennas according to the
prompted instructions and ensure that the aircraft is in the place for the best
communications.
5. Linking
When you buy a package that includes both an aircraft and a remote controller, the
remote controller is already linked to your aircraft before delivery. You can directly
use the aircraft after you activate it.
In other cases, you need to link the remote controller to your aircraft manually.
Perform the following steps to do that.
1. Press the linking button next to the USB port on the right of the aircraft body to
let the aircraft enter the linking state.