User manual

30
20
Horn hole
Plays recordings or messages about aircraft statuses.
21
Tripod mount
Used for connecting to the tripod.
22
Air inlet
Used for heat dissipation for the remote controller.
23
Handle
Makes it convenient for you to carry by hand.
24
Stick storage slot
Used for placing the stick.
25
Battery
Removable battery.
2.2.2 Use the Remote Controller
1. Check the battery level
Press the power button to view the battery level of the remote controller.
1 LED indicator is normally on:
battery level ≥25%
2 LED indicators are normally on:
battery level ≥50%
3 LED indicators are normally on:
battery level ≥75%
4 LED indicators are normally on:
battery level =100%
2. Turn on/off
Press the power button for 2s to turn the
remote controller on/off.
3. Charge the remote controller
Connect one end of the charging cable
to the USB port on the top of the remote
controller, and the other end to an AC
power supply (100-240V) through the
adapter.
Note
 During charging, the LED indicators flash in turn. All LED indicators are on when
the battery is full.