User manual

16
2.1.4 Gimbal and Camera
The aircraft has a high-precision 3-axis gimbal, which keeps the camera steady
during the flight and allows you to capture clear and stable images. To ensure that
the gimbal can work properly, the gimbal temperature must keep between -10ºC
and 50ºC. You can pitch or tilt the gimbal (-30º degrees to 90º degrees) using a dial
on the remote controller or an Autel Explorer App.
1. EVO II Pro V3 gimbal
① MCU Mounting Plate
⑤ Pitch Motor
② Vibration Absorber
⑥ Roll Motor
③ Camera
⑦ Yaw Motor
④ Filter
Important
 A gimbal protective cover is used for stabilizing the gimbal and preventing the
gimbal from rotating accidentally or being damaged during storage.
 Please remove the gimbal protective cover before you turn on the aircraft.
Otherwise, the gimbal motor and circuit may be damaged.
 When you turn on the aircraft, the gimbal will automatically rotate to perform
self-check and calibration. Make sure that there is no object near the gimbal
that prevents the gimbal movement.
2. Gimbal Operation Mode
 Stabilized mode
The roll axis remains horizontal and the pitch axis is at a user-defined angle. This
mode is suitable for capturing stable horizontal images and videos.