User manual
Table Of Contents
- Chapter 1
- About the Manual
- 1.1 Instructions for the first flight
- Chapter 2
- Be familiar with your smart UAV.
- 2.1 Aircraft
- 2.2 Remote controller
- Chapter 3
- Flight preparation
- 3.1 Battery preparation
- 3.2 Remote controller preparation
- 3.3 Aircraft preparation
- Chapter 4
- Flight Operation
- 4.1 Check list before flight
- 4.2 Flight operation
- 4.2.1 Motor start and aircraft takeoff (American m
- 4.2.2 Manipulator control (American manipulator)
- Chapter 5
- Maintenance and service
- 5.2 Solutions to common faults
- 5.3 Storage and maintenance
- 5.4 Warranty
- 5.5 Customer service
- Chapter 6
- Annex
- 6.1 Authentication information and restricted area
- 6.2 Specifications
37
Three lights normally on: battery level ≥75%
Four lights normally on: battery level ≥100%
Remark
The indicators in the charging process flash sequentially, and are all normally on after full
charging.
Adjust antenna
Unfold the remote controller antenna and adjust the antenna position. Antennas in different
positions receive signals of different intensities. When the antenna and the back of the remote
controller are at an angle of 180° or 260°, and the antenna plane right faces the aircraft, the signal
quality of the remote controller and the aircraft can be in the optimal status. When controlling the
aircraft, be sure to keep the aircraft within the optimum communication range.