User manual
Table Of Contents
- Chapter 1
- About the Manual
- 1.1 Instructions for the first flight
- Chapter 2
- Be familiar with your smart UAV.
- 2.1 Aircraft
- 2.2 Remote controller
- Chapter 3
- Flight preparation
- 3.1 Battery preparation
- 3.2 Remote controller preparation
- 3.3 Aircraft preparation
- Chapter 4
- Flight Operation
- 4.1 Check list before flight
- 4.2 Flight operation
- 4.2.1 Motor start and aircraft takeoff (American m
- 4.2.2 Manipulator control (American manipulator)
- Chapter 5
- Maintenance and service
- 5.2 Solutions to common faults
- 5.3 Storage and maintenance
- 5.4 Warranty
- 5.5 Customer service
- Chapter 6
- Annex
- 6.1 Authentication information and restricted area
- 6.2 Specifications
36
20
Horn hole
To broadcast the sound and aircraft status message
21
Standard 1/4
interface
To connect foot stool
22
Air inlet
To dissipate heat of the remote controller
23
Lower hook
To fix remote controller sling
24
Protective cover
To prevent the remote controller from external damage such as
collision and abrasion
2.2.2 Use remote controller
Check the battery level
Short-press the power supply button to check the remote controller battery level.
One light normally on: battery level ≥25%
Two lights normally on: battery level ≥50%
Three lights normally on: battery level ≥75%
Four lights normally on: battery level ≥100%
Turn on/off
Long-press the power supply button for 2s to turn on/off the remote controller.
Charge
Remote controller status indicator.
One light normally on: battery level ≥25%
Two lights normally on: battery level ≥50%