User manual
Table Of Contents
- Chapter 1
- About the Manual
- 1.1 Instructions for the first flight
- Chapter 2
- Be familiar with your smart UAV.
- 2.1 Aircraft
- 2.2 Remote controller
- Chapter 3
- Flight preparation
- 3.1 Battery preparation
- 3.2 Remote controller preparation
- 3.3 Aircraft preparation
- Chapter 4
- Flight Operation
- 4.1 Check list before flight
- 4.2 Flight operation
- 4.2.1 Motor start and aircraft takeoff (American m
- 4.2.2 Manipulator control (American manipulator)
- Chapter 5
- Maintenance and service
- 5.2 Solutions to common faults
- 5.3 Storage and maintenance
- 5.4 Warranty
- 5.5 Customer service
- Chapter 6
- Annex
- 6.1 Authentication information and restricted area
- 6.2 Specifications
32
Polygon task: Generate an irregular rectangular flight area. When the double grid is turned
off, the aircraft flies along a bow shape, which is applicable to orthophoto data acquisition.
When the double grid is turned on, it flies along a tic-tac-toe shape, which is applicable to 3D
modeling.
Oblique photography: The generated route is composed of one orthographic route and four
oblique routes, applicable to accurate 3D modeling.
Rectangular task
Polygon task
Oblique photography
Flight altitude
√
√
√
Oblique height
√
√
√
Ground resolution
(GSD)
▲
▲
▲
Oblique ground
resolution
×
×
▲
Flight speed
√
√
√
Oblique speed
×
×
√
Forward overlap rate
√
√
√
Oblique forward overlap
rate
×
×
√
Sidelap rate
√
√
√
Oblique sidelap rate
×
×
√
Gimbal pitch angle
√
√
√
Oblique gimbal pitch
angle
×
×
√
Return action
Return/hover
Return/hover
Return/hover
Main rout angle
√
√
√
Double grid
√
√
×
Remark
√ - adjustable × - unadjustable ▲ - display value, unadjustable
Remark
Forward overlap rate: the overlap area rate of the ground taken by adjacent photos along the