User manual

28
 Gesture recognition
The main camera uses deep learning algorithms to recognize and respond to three gesture
instructions: straighten your arms up to set yourself as a target, raise your arms to take a photo,
and raise one arm to start or stop recording.
 Precise landing
Regarding precise landing, the binocular vision system below the aircraft is used to record the
information at its take-off position. During the return and landing process, the visual algorithm is
used to calculate the position error between the aircraft and its take-off point in real time, so as to
control the aircraft to precisely land at its take-off position.
 Safe landing
Regarding the safe landing function, the downward vision system of the aircraft is used to create a
density depth map, and the flatness and angle of the depth map are calculated to detect whether the
surface is flat enough to ensure a safe landing.
2.1.8 Extension accessories
The EVO II Enterprise can be compatible with accessories through the extension accessory
interface of the aircraft, adapting to different industry application scenarios.
 Install accessory
1. Make sure that the aircraft power supply has been turned off.
2. Gently twist to take off the extension accessory interface protective cover.
3. Align screws on both sides of the accessory with the screw holes, and tighten the screws.
 Disassemble accessory
1. Make sure that the aircraft power supply has been turned off.
2. Unscrew the screws on both sides of the accessory, and take off the accessory.
3. Insert both ends of the protective cover into corresponding slots.
 Use accessory
The EVO II Enterprise is compatible with the following accessories:
Megaphone
Searchlight