User's Manual

dropped on the ground, or the aircraft’s flight direction does not match control

inputs), it is recommended to calibrate the remote control. You can calibrate the

remote control by using the Autel Explorer™ app (for details, see the App

Manual) or according to the following steps.

1. Turn off the remote control. Press and

hold the Power Button ( ) and

Take-off/Landing Button ( )

simultaneously until the screen

appears as shown on the right. The

four crossed bars represent the left

and right Command Sticks. The

horizontal bar at the top is the Gimbal

Pitch Dial.

2. Release both Command Sticks and

the Gimbal Pitch Dial naturally to the

central position. The three middle

rounds on the remote control

calibration screen will be highlighted

successively.

3. Push and hold the Command Sticks

in each of the eight possible directions

until you hear a beep each time. Then,

turn the Gimbal Pitch Dial clockwise

until you hear a beep, and then

counterclockwise until you hear a

beep.

4. Calibration is completed when all the

bars on the screen are highlighted.

3.2.4 Pairing the Aircraft & Remote Control

The remote control and aircraft come paired out of the box. When you need to

pair them again — such as after pressing the Remote Control Pairing Button

on the aircraft — follow these steps: