User's Manual

42
The antennas can be rotated 270 degrees as shown in the diagram.
 Positioning the Antennas
Vertically align the antennas in parallel with each other, as shown below.
3.2.2 Powering On/Off the Remote Control
 Powering On
Press and hold the Power Button ( ) for 2 seconds until you hear a short
beep. The Flight Information Panel will light up and cycle through an initial
verification test.
IMPORTANT
Always turn on the remote control first before powering on the aircraft.
 Powering Off
Press and hold the Power Button ( ) for 2 seconds until you hear a short beep.
IMPORTANT
Always power off the aircraft before turning off the remote control.
NOTE
When not connected to the aircraft, the remote control beeps after 15
minutes of inactivity, and turns off automatically after 18 minutes.
3.2.3 Remote Control Calibration
If the Command Sticks are abnormal (for example, if the remote control is