User's Manual

40
3.1.3 Charging
The aircraft battery and remote control can be charged simultaneously using the
supplied charger. There are two connectors attached to the charger’s adapter
block. As shown below, the fixed cable goes with the aircraft battery, and the
USB cable is used to charge the remote control.
 Charging the aircraft and remote control
1. Plug the charging cable in as follows:
Aircraft Battery: Plug the charging
connector into the battery’s charge port.
Remote Control: Open the protector
on the USB port and plug in the
provided charging cable.
2. Plug the charger into a power outlet.
 Battery Level Indicators: The LEDs on the aircraft battery will
illuminate from left to right to indicate the current battery level during the