User's Manual

 Prerequisites

 Ensure that the aircraft is in GPS or visual positioning mode.

 Wait until the flight LED indicators are either slow flashing green or double

flashing red before taking off.

 Exercise increased caution while flying if the GPS signal is weak or visual

positioning requirements cannot be met — for example, when around

surfaces with little visible texture or when flying at an altitude of over 12

meters (36 feet).

 The binocular vision sensing systems and Starpoint™ Positioning System

are affected by the brightness and texture of the surfaces over which the

aircraft is flying. Avoid flying over surfaces that are:

˗ Monochromatic

˗ Highly reflective, such as water

˗ Especially dark or bright

˗ Subject to frequent lighting changes

˗ Made of closely repeating patterns, such as tiles

˗ Sound-absorbent, such as thick carpeting

˗ In motion, such as roads with heavy traffic

 Keep the binocular camera lenses and sensors clean.

 To avoid interference with the Starpoint™ Positioning System, do not use

40 kHz ultrasonic devices, such as ultrasonic rangefinders, fault detectors,

cleaners or welding machines.

 Functionality Description

 Smart Tracking

Smart tracking uses deep learning algorithms to detect six types of subjects in