User's Manual

26
NOTES
• If the aircraft is within 50 horizontal meters (150 feet) from the home
point when your aircraft battery level reaches 25% (Low Battery
Warning), the aircraft will not perform the Go Home procedure.
• If GPS is unavailable when Failsafe is activated during a Low Battery
Warning, the aircraft will not execute the Go Home procedure. Instead,
the aircraft will enter ATTI mode and stay in your control. The aircraft
will proceed to land automatically only when the battery reaches 15%
(Critically Low Battery Warning).
 Landing Features
 Landing Protection
When the aircraft arrives above the home point, Landing Protection
functionality will detect the ground conditions below. The aircraft will land
automatically if the ground is level and flat. If not, it will hover at the current
location to wait for the next command.
 Accurate Landing
The aircraft will scan and match the terrain features if Accurate Landing
function is active, it will land as close as possible to the takeoff point once the
current terrain matches the takeoff point terrain.
IMPORTANT
• The aircraft records the takeoff point as the default home point.
Accurate Landing is available only when the home point has not been
refreshed during the flight.
• Choose an open and well-lit area (such as a lawn) as your takeoff point.
• When Accurate Landing is preparing to land the aircraft, make sure
that conditions at your takeoff point haven’t changed.
NOTE
Landing Protection and Accurate Landing can be enabled using the
app. Instructions for these functions are available in the App Manual.