User's Manual

25
the home point, the aircraft will automatically descend and land.
 Failsafe
The Failsafe function is designed to help the EVO 2 automatically return home or
land in its current position when necessary. Failsafe will be activated in the two
situations described below.
 Communication Lost
Failsafe will be activated if communication is lost between your aircraft and
remote control for 3 seconds.
If GPS is available when the Failsafe function is activated, the aircraft will
automatically use the Go Home function. Otherwise, it will land from its current
position. When communication is restored, you can still press the Pause Button
( ) to regain control of the aircraft.
 Low Aircraft Battery Level
Failsafe will also be activated in either of the following low battery conditions.
A. The aircraft continually calculates the battery level required for the aircraft to
return to the home point. If the battery level reaches the minimum level
required for the aircraft to return to the home point, a notice will appear on
the Autel ExplorerTM app. Failsafe will be activated and the Go Home
process will be initiated. Again, you can regain control of the aircraft by
pressing the Pause Button ( ).
B. When the aircraft's battery level reaches the 25% threshold, you’ll receive a
Low Battery Warning and Failsafe will be activated, after which the aircraft
will automatically return home. If you retake control of the aircraft, you’ll
receive a Critically Low Battery Warning when the battery reaches 15%,
and the aircraft will automatically land in its current position. If landing in the
current position may result in an emergency, you can press the Pause Button
( ) to halt the landing and fly it to the nearest possible safe landing site.