User's Manual

24
The EVO 2 can automatically switch between two flight modes depending on
GPS availability and flying conditions.
Flight Modes
Flight Mode
Description
GPS Mode
GPS Mode is activated if the aircraft detects proper GNSS signals.
GPS works with the Forward and Downward Vision Systems to
locate and navigate obstacles, provide stable and smooth flight
maneuvers, and enable safety features like Go Home and Failsafe.
ATTI Mode
ATTI Mode is activated when the GPS signal is weak, and lighting
conditions are insufficient for the vision systems. Obstacle avoidance
features are disabled, and the aircraft controls altitude through its
barometer only.
2.1.6 Smart Flight Features
 Go Home
The Go Home function can be enabled only when a good GPS signal is available.
To manually activate the Go Home process, press and hold the Go Home
Button ( ) for 3 seconds on the remote control. Once the aircraft receives this
command, it will return automatically and land at the present home point.
The EVO 2 can detect and avoid obstacles on its flight path using its Forward
Vision System. The remote control’s function will be disabled while the aircraft
returns to the home point, but you can reactivate it by pressing the Pause
Button ( ).
WARNING
If the Forward Vision System is not enabled during the Go Home period,
the aircraft will not automatically avoid obstacles. Press the Pause
Button ( ) on the remote control to exit the Go Home feature and
regain control of the aircraft.
IMPORTANT
• The default Go Home altitude is 30 meters (90 feet). If you activate Go
Home when the aircraft is at an altitude lower than that, it will rise to 30
meters (90 feet) before returning home. Learn how to adjust the Go
Home altitude in the App Manual.
• If the Go Home function is activated within a 10-meter (30-foot) radius of