User's Manual

20
 Replacing the Gimbal
1. Gently grasping the two vibration absorber tails with your thumb and
forefinger, pick up the gimbal. Slide the gimbal down and forward in a
straight line, following the gimbal compartment groove.
Notes: 1) Ensure that the loops at the front of the gimbal align with the two pins in
the gimbal compartment at the nose end of the aircraft.
2) Ensure that the gimbal is flush with the gimbal compartment groove.
2. Insert the head of the connector cable into its slot, gently pushing it in as far
as it will go.
Place the gimbal cover on top of the gimbal compartment.