User's Manual

① MCU Installation Pan

⑤ Pitch Motor

② Vibration Absorber

⑥ Yaw Motor

③ Filter

⑦ Roll Motor

④ Camera

IMPORTANT

• The EVO 2 camera gimbal is held in place with a gimbal holder to

protect the gimbal from the incidental rotation — and to avoid

damage when stored.

• Remember to remove the holder before powering on the aircraft.

Failure to do so may result in damage to the gimbal motors and

circuitry.

• When the aircraft is powered on, the gimbal will automatically rotate

to perform self-test and calibration. Ensure that there are no objects

near the gimbal that could obstruct its motion.

The gimbal has two working modes:

 Stabilized Mode: The roll axis stays horizontal, and the pitch axis stays

at the user-specified angle. This mode is designed for capturing stable

horizontal photos and videos.

 FPV Mode: The roll axis stays aligned with the aircraft's roll orientation,

and the pitch axis stays at the user-specified angle. This mode is

designed for use with first-person view.