User's Manual

16
The additional functions listed below protect and preserve the battery.
 Storage Self-Discharge Protection: If the battery is stored in a high-
temperature environment or is idle for 6 days with a high power level, self-
discharge protection will be activated. The battery will discharge
automatically to a safe level. This is the default setting, and the discharge
process takes 2-3 days. While there’s no indication that the battery is
performing a self-discharge cycle, you may notice a slight warming of the
battery, which is normal. The discharge threshold can be customized using
the Autel ExplorerTM app.
 Sleep Mode Protection: If the battery power level is low, the battery will
automatically enter sleep mode to prevent damage. In this mode, the battery
will not respond when you push the Power Button. To wake up the battery,
connect it to the charger.
 Charging Temperature Detection: If the charging temperature reaches
below 10°C (50°F) or above 45°C (113°F), the battery will stop charging.
 Overcurrent Protection: If the charging current exceeds 8A, the battery will
stop charging.
 Overcharge Protection: Charging will stop automatically when the battery
is fully charged.
 Balance Protection: The voltage of each battery cell is balanced to prevent
overcharging or over-discharging.
 Over-Discharge Protection: When the battery is not in use, it will
automatically disconnect the power output function once the self-discharge
cycle is completed. This function is disabled during flight.
 Short Circuit Protection: The power supply will be cut off in the event that
a short circuit is detected.
 Power Saving Mode: After 30 minutes of inactivity, the battery will turn off.
 Communication: When in use, the aircraft continuously syncs with the
battery to provide real-time information including voltage, capacity, current,
and temperature.
 Ultra-Low Power Consumption Mode: To conserve power, this mode will
be activated if the battery is idle for 7 days with a voltage lower than 11.6 V.
The battery will resume normal function after being connected to the charger.