Dragonfish Standard Quick Start Guide
Contents Item list Getting to know the aircraft Getting to know the mobile ground station Getting to know the base station Using the Dragonfish Standard aircraft Charging Setting up the base station Assembling the aircraft Powering on / Activating the aircraft Powering on the base station Powering on the ground station Powering on the aircraft Activating the aircraft Flight Activating the aircraft Automatic takeoff Specifications 2 3 4 4 5 5 5 6 8 8 8 8 8 9 9 10 11 1
Item list Aircraft body 9.
Getting to know the aircraft The Dragonfish Standard aircraft integrates intelligent and superior flight control technology, gimbal technology, and imaging technology. The aircraft boasts a new tilt rotor design that combines the efficiency of fixed-wing aircraft endurance with the takeoff convenience of traditional multi-rotor drones. A 5 second self-check system ensures the aircraft is safe and ready for operation. It can be assembled quickly, enabling set up and take-off in a matter of minutes.
1. Smart battery 2. RTK antenna 3. Horizontal stabilizer 4. Power button/indicator 5. Propeller blades 8. Wingtip propellers 9. Rear landing gear 10. Wing lock 11. Battery release button 12. Front landing gear 6. Body motor 7. Wing motor 13. Gimbal camera 14. Airspeed sensor 15. Tilting wingtip 16. GPS module 17. Ultrasonic Positioning Sensors 18. Dust Net 19. PTZ installation interface Getting to know the portable ground station The Dragonfish Standard is equipped with a 9.
1 3 2 4 MATCH WIFI DC 5 1. 2. 3. 4. IN 9 10 RTK POW ER CH MAT 6 7 8 WiFi indicator Linking indicator RTK indicator Power indicator 5. Charging port 6. Frequency button 7. Power button 8. Port cover 9. Antenna interface 10. Tripod interface Using the Dragonfish Standard Charging Setting up the base station 1. Charging the Intelligent flight battery 1. Unfold the tripod, install the base station tray, and lock the tray. 2. Charging the ground station 2.
3. Charging the base station 3. Install the antenna on the tripod and connect the antenna feeder to the base station antenna port. Assembling the aircraft 1.Install the left and right wings Align and fasten Align and fasten 2.
3. Install the wingtip propeller Before installing or removing the propeller, power off the aircraft (as shown in the illustration). ▶ ▶ 1 2 3 Mount on the base Press and rotate the paddle Install to the locked position Locking direction: Press and Rotate in the indicated direction to lock the propeller. Unlocking direction: Press and Rotate the propeller in the opposite direction to unlock it.
6. Installing the Intelligent Flight Battery When installing or removing the aircraft battery, be sure to power off the aircraft. • Align the battery to the battery interface on the fuselage and install it. Powering on / Activating the aircraft 1. Powering on the base station Short press the power button for 1 second to turn on the base station. 2. Powering on the ground station Short press the power button for 1 second to turn on the ground station. WER K PO I RT H WIF MATC DC IN MATCH 3.
Flight Enter the APP safe flight interface. Before taking off, please place the aircraft on a flat surface with the tail facing towards you. Manual takeoff ① Switch the ground station gear to M gear. A ② Check the aircraft system status. M ③ Simultaneously move the joystick in inwards or outwards and hold for 2 seconds to arm the motors. ④ Push up the left stick (mode 2) to take off.
Flight Enter the APP safe flight interface. Before taking off, please place the aircraft on a flat surface with the tail facing towards you.
Specifications Aircraft Size 2.3*1.29*0.46 m Weight (including two batteries, without gimbal） 7 kg Single battery weight 1.3 kg Maximum load 1.5 kg Maximum take-off weight 8.5 kg Working frequency Video Transmission 902-928 MHz (Only for FCC/ISED); 2.4000-2.4835 GHz; 5.150-5.250 GHz (Only for FCC/ISED); 5.725-5.850 GHz Data Transmission 5.729-5.771 GHz EIRP (Equivalent radiated power) 900MHz FCC/ISED: < 30 dBm； 2.4 GHz FCC/ISED/RCM: < 30 dBm CE: < 20 dBm； 5.2 GHz FCC/ISED: < 25 dBm 5.
1.
5.725 - 5.850 GHz Other parameters: Battery Name: Lithium polymer Battery Capacity: 8200mAh Voltage: 11.4 V Battery type: Li-Po Energy: 93 Wh Charging time: 120 minutes Battery life Approximately 3 hours (maximum brightness) Approximately 4.
Positioning update rate 1 Hz, 2 Hz, 5 Hz, 10 Hz and 20Hz Cold start < 40 s Hot Start < 10 s Recapture Initialization reliability <1s Initialization reliability > 99.9% Differential data transmission format RTCM 2.X/3.X Communication Data link Image transmission, Wi-Fi Image transmission Working efficiency 902-928 MHz (Only for FCC/ISED); 2.4000-2.4835 GHz; 5.150-5.250 GHz (Only for FCC/ISED); 5.725-5.850 GHz 900MHz FCC/ISED: < 30 dBm； 2.4 GHz FCC/ISED/RCM: < 30 dBm CE: < 20 dBm； 5.
Runtime Physical properties Working temperature >7.
