Quick Start

▶ ▶
1 2 3
Locking direction: Press and Rotate in the indicated direction to lock the propeller.
Unlocking direction: Press and Rotate the propeller in the opposite direction to unlock it.
The marked propeller is to be mounted on the marked motor
Unmarked propeller is to be mounted on the unmarked motor
Align the red dots on the mount with the red dots of the gimbal interface of the fuselage, and rotate
the locked position.
5. Unlock mount
▶ ▶ ▶
Align the top and
bottom red dots
1
Insert the gimbal up
vertically into the slot
2
Rotate the lock ring
to the locked position
3
▶ ▶
Press the unlock button
1
Rotate the lock ring to
the unlocked position
2
Remove mount by
lowering vertically down
3
3.Install the wingtip propeller
4. Mounting
08
Mount on the base Press and rotate the paddle Install to the locked position