Dragonfish Pro Quick Start Guide
CONTENTS Item list ··················································································01 Getting to know the aircraft ··················································································03 Getting to know the mobile ground station ··················································································04 Getting to know the base station ··················································································04 Using the Dragonfish Pro aircraft ·······
Item list 01 Aircraft body 1pc 9.
Base station tripod 1pc Base station charger 1pc USB Type-C cable 1pc Repair tool kit 1pc Gimbal Camera 1pc (The gimbal model is subject to the actual set purchased) Ground station charger 1pc Ground station lanyard 1pc Tail 1pc Wing set 1pairs TF card 1pc Documentation 1set (includes Dragonfish Pro, Base station, Charger, Battery quick guide, Disclaimer) 02
Getting to know the aircraft The Dragonfish Pro aircraft integrates intelligent and superior flight control technology, gimbal technology, and imaging technology. The aircraft boasts a new tilt rotor design that combines the efficiency of fixed-wing aircraft endurance with the takeoff convenience of traditional multi-rotor drones. A 5 second self-check system ensures the aircraft is safe and ready for operation. It can be assembled quickly, enabling set up and take-off in a matter of minutes.
① RTK antenna ⑧ Wingtip propellers ⑮ Airspeed sensor ③ Smart battery ⑩ Wing lock ⑰ GPS module ⑨ Rear landing gear ② Tail ⑪ Front landing gear ④ Power button/indicator ⑫ Battery cover ⑤ Propeller blades ⑬ Battery release button ⑥ Body motor ⑭ Gimbal camera ⑦ Wing motor ⑯ Tilt wingtip ⑱ Ultrasonic Positioning Sensors ⑲ Millimeter-wave radar Getting to know the portable ground station The Dragonfish Pro is equipped with a 9.7-inch TFT-LCD touch screen (2048*1536).
1 3 2 9 4 MATCH WIFI DC 5 IN 10 RTK POW ER CH MAT 6 7 8 ① WiFi indicator ⑤ Charging port ⑧ Port cover ③ RTK indicator ⑦ Power button ⑩ Tripod interface ② Linking indicator ④ Power indicator ⑥ Frequency button Using the Dragonfish Pro Charging 1. Charging the Intelligent flight battery 2.
3. Charging the base station Setting up the base station 1. Unfold the tripod, install the base station tray, and lock the tray. 2. Install the base station body to the tray and tighten the lock on the tray nut. Ensure that the base station is level and stable. 3. Install the antenna on the tripod and connect the antenna feeder to the base station antenna port.
Assembling the aircraft 1. Install the left and right wings Align and fasten Align and fasten 2.
3.Install the wingtip propeller ▶ 1 ▶ 2 Mount on the base 3 Press and rotate the paddle Install to the locked position Locking direction: Press and Rotate in the indicated direction to lock the propeller. Unlocking direction: Press and Rotate the propeller in the opposite direction to unlock it. The marked propeller is to be mounted on the marked motor Unmarked propeller is to be mounted on the unmarked motor 4.
6. Installing the intelligent Flight Battery When installing or removing the aircraft battery, be sure to power off the aircraft. Align the battery to the battery interface on the fuselage and install it. Powering on / Activating the aircraft 1. Powering on the base station 2. Powering on the ground station Short press the power button for 1 second to turn on the base station. Short press the power button for 1 second to turn on the ground station. 3. Powering on the aircraft 4.
Flight Enter the APP safe flight interface. Before taking off, please place the aircraft on a flat surface with the tail facing towards you. Manual takeoff 1. Switch the ground station gear to M gear. A 2. Check the aircraft system status. M 3. Simultaneously move the joystick in inwards or outwards and hold for 2 seconds to arm the motors. 4. Push up the left stick (mode 2) to take off. or *Manual mode is not recommended for non-professionals. Automatic takeoff 1.
3. Aircraft system status check 4. Flight interface display Specifications Aircraft Size 1.65x3.04x0.46 m Weight (including two batteries, without gimbal) 14.5 kg Single battery weight 3.6kg Maximum load 2.5 kg Maximum take-off weight 17.0 kg Working frequency Video Transmission 902-928 MHz (Only for FCC/ISED); 2.4000-2.4835 GHz; 5.150-5.250 GHz (Only for FCC/ISED); 5.725-5.850 GHz Data Transmission 5.729-5.
Maximum service altitude 6000 m Maximum wind resistance During fixed-wing flight: 15 m/s (level 7 wind) Vertical take-off and landing: 12 m/s (level 6 wind) Maximum flight time 158 min Supported Payloads DG-Z2, T3, T3H, L20T, L50T Supported Gimbal Configurations Fast Disassembly Ingress Protection Rating IP43 GNSS GPS + GLONASS + BeiDou + Galileo Working temperature -20° C to 50° C EIRP (Equivalent radiated power) 900MHz FCC/ISED: < 30 dBm； 2.4 GHz FCC/ISED/RCM: < 30 dBm CE: < 20 dBm； 5.
Maximum ttransmitting distance (unobstructed, free of interference) 9FCC: 10 km CE: 5 km Digital transmission Working frequency 5.729-5.771 GHz Wi-Fi parameters Protocol Working efficiency Wi-Fi Direct; Wireless; Display; 802.11a/g/n/ac; Wi-Fi with 2×2 MIMO 2.400 - 2.4835 GHz 5.150 - 5.250GHz (Only for FCC/ISED) 5.725 - 5.850 GHz Other parameters Battery Name: Lithium polymer Battery Capacity: 8200mAh Voltage: 11.
Satellite positioning module GPS + GLONASS + Galileo Size 319×233×74 mm (antenna folded) 319×398×74 mm (antenna expanded) Weight 1987g Base station GNSS receiver Satellite receiving frequency Simultaneously receive: GPS: L1, L2, L5 BeiDou: B1, B2, B3 GLONASS: F1, F2 Galileo: E1, E5A, E5B Positioning accuracy Single Point Horizontal: 1.5 m (RMS) Vertical: 3.0 m (RMS) RTK Horizontal: 1 cm+1 ppm (RMS) Vertical: 1.
Physical properties Dimensions (base station body + extension rod) 193 mm×177 mm×73 mm Weight 1275g Ingress protection IP64 Working temperature -20°C to 50°C Image transmission parameters Working efficiency 902-928 MHz (Only for FCC/ISED); 2.4000-2.4835 GHz; 5.150-5.250 GHz (Only for FCC/ISED); 5.725-5.850 GHz EIRP (Equivalent radiated power) 900MHz FCC/ISED: < 30 dBm； 2.4 GHz FCC/ISED/RCM: < 30 dBm CE: < 20 dBm； 5.2 GHz FCC/ISED: < 25 dBm 5.
