Owner's Manual

Additional Functions
The additional functions listed below protect and preserve the battery.
Storage Self-Discharge Protection: If the battery
is
stored
in
a
high-temperature environment or
is
idle for 6 days with a high power
level, self-discharge protection will be activated. The battery will
discharge automatically
to
a safe
level.
This
is
the default setting, and
the discharge process takes 2-3 days. While there's no indication that
the battery
is
performing a self discharge cycle, you may notice a
slight warming
of
the battery, which
is
normal. The discharge
threshold can be customized using the Autel Explorer™ app.
Sleep Mode Protection: If the battery power
level
is
low, the battery will
automatically enter sleep mode to prevent damage.
In
this mode, the
battery will not respond when you push the Power Button.
To
wake
up the battery, connect it
to
the charger.
Charging Temperature Detection: If the charging temperature reaches
below 5°C
(41
°F)
or
above 45°C (113°F), the battery will stop
charging.
Overcurrent Protection: If the charging current exceeds
SA,
the
battery will stop charging.
Overcharge Protection: Charging will stop automatically when the
battery
is
fully charged.
Balance Protection: The voltage of each battery cell
is
balanced
to
prevent overcharging or over-discharging.
Over-Discharge Protection: When the battery
is
not
in
use, it will
automatically disconnect the power output function once the
self-discharge cycle
is
completed. This function
Is
disabled during
flight.
Short Circuit Protection: The power supply
will
be cut off
in
the event
that a short circuit
is
detected.
Power Saving Mode: After
30
minutes
of
inactivity, the battery will turn
off.
Communication: When
in
use, the aircraft continuously syncs with the
battery
to
provide real-time information including voltage, capacity,
current, and temperature.
Ultra-Low Power Consumption Mode:
To
conserve power, this mode
will be activated if the battery
is
idle for 6 days with a voltage lower
than 11.6
V.
The battery will resume normal function after being
connected
to
the charger.