Owner's Manual

1) Aircraft Battery: Plug the charging
connector into the battery's charge port.
2) Remote Control: Open the protector on
the USB port and plug in the provided
charging cable.
NOTE
• Always fully charge the aircraft and remote
control battery before flying.
• It takes approximately 90 minutes to fully
charge the aircraft battery, and 180 minutes to
charge the remote control.
7. INSTALLING THE AUTEL EXPLORER™ APP(OPTIONAL)
The Autel ExplorerTM app delivers a live stream, and enhanced flight and
camera controls to your mobile device. Follow the steps below to get
connected.
1. Search for 'Autel Explorer' from the App Store or Google Play and
install the app for
EVO II on your mobile device.
2. Launch the
app on your mobile device.
3. Connect the mobile device to the remote control by following the
onscreen prompts.
m rwwpg..g.y
NOTE: Autel Explorer supports iOS 9.0 or later and Android 4.4 or later.
8. PREPARING THE AIRCRAFT
1) Remove the Gimbal Holder.
7