Owner's Manual
Table Of Contents
Follow the steps below to charge your aircraft battery and remote control:
1. Connect one end of the car charger to your car's cigarette lighter socket
and the other end to the aircraft battery, as shown in the following figure.
2. If you want to charge your remote control, use a USB cable to connect the
USB port on the car charger with the remote control.
During charging, the LED indicator status is as follows:
• The LED indicator on the car charger turns solid red.
• The LED indicators on the aircraft battery blink green.
• The LED indicator on the remote control blinks green if the
remote control is powered on. If the remote control is powered
off, the LED indicator turns solid red.
3. Disconnect the car charger from the cigarette lighter socket when the
battery is fully charged.
When the battery is fully charged, the LED indicator status is as follows:
• The LED indicators on the aircraft battery turn off.
• The LED indicator on the remote control is solid green
regardless of whether the remote control is powered on or not.
Using the Car Charger
• DO NOT cover the car charger during charging to ensure well heat
dissipation.
• Always place the car charger in a stable and safe place.
• Use the car charger when the car engine is working to attain better
charging performance.
• During battery charging, if the car charger is loose from the cigarette
WARNING