EVO Nano Series User Manual
Table Of Contents
- User Manual
- EVO Nano Series
- Terms for Usage
- Trademark Information
- Copyright
- Disclaimer
- Data Storage and Use
- Table of contents
- Chapter 1 Read Instructions
- Chapter 2 Aircraft
- ① Propeller
- ④ Forward visual system
- ② Motor
- ⑤ Antenna
- ③ PTZ camera
- ⑥ Rear vision system
- ⑨ USB-C port
- ⑦ Power button
- ⑩ Rear LED indicator
- ⑧ Aircraft battery
- ⑪ SD card slot
- ⑫ Air outlet
- ⑬ Ultrasonic sensor
- ⑮ Air inlet
- ⑭ Downward vision system
- There is an LED indicator on the tail of the aircr
- Status Definition of Flight LED Indicator
- Back LED Indicator
- Meaning
- Normal status
- Green light flashes slowly (1 flash every 2 second
- Aircraft in GPS mode
- Yellow light flashes slowly (1 flash per second)
- Aircraft in ATTI mode
- Pairing
- Green light flashes quickly
- Aircraft and remote controller are pairing
- Green light stays on for 5 seconds
- Pairing successful
- Red light stays on for 5 seconds
- Pairing failed
- Compass calibration
- Yellow light is on
- Starting compass calibration
- Yellow light is on
- Calibration failed
- Green light is on
- Calibration successful
- Warning
- Yellow light flashes slowly (1 flash per second)
- Low battery warning
- Red light flashes slowly (1 flash per second)
- Critical low battery alert
- Updating
- Green light flashes quickly
- Aircraft is updating
- Green light is is on
- Update successful
- Yellow light flashes slowly (1 flash per second)
- Update failed
- The battery for EVO Nano is 2250mAh and has the ra
- The battery indicator is divided into LED 1, LED 2
- Chapter 3 Remote controller
- Chapter 4 Autel Sky App
- Chapter 5 Flight
- 1) As shown in figure, press the left and right st
- 2) Slowly push up the left stick.
- 1) Press and slide the one-click takeoff button (
- 2) The aircraft will automatically rise to the hei
- Class I: main airport & low-altitude area for mann
- Class II: Sensitive area or organization & militar
- Chapter 6 Maintenance and service
- Method 1: download firmware upgrade package from A
- Method 2: download firmware upgrade package from t
- Chapter 7 Technical Specification
Max control speed (pitch)
30°/s
Angular vibration range
±0.003°
Perception
system
Forward
Accurate measurement range: 0.5~16m
Effective sensing speed: <10m/s
FOV: Horizontal<40°,Vertical<30°
Backward
Accurate measurement range: 0.5~18m
Effective sensing speed: <12m/s
FOV: Horizontal<40°,Vertical<30°
Downward
Accurate measurement range: 0.5~20m
Visual hovering range: 0.5~40m
FOV: Horizontal<40°,Vertical<30°
Operating environment
Forward, backward:
Surface with clear pattern and adequate
lighting(lux> 15)
Downward:
Surface with clear pattern and adequate
lighting(lux> 15);
Detects diffuse reflective surfaces(>20%)
(walls, trees, people, etc.)
Camera
(Nano)
Sensor
CMOS: 1/2 inch
Effective pixels: 48M
Pixel size: 1.6μm*1.6μm(Bin2)
Lens
FOV: 84°
Equivalent focal length: 24mm
Aperture: f/2.8
Focus range: 1m ~ ∞
Focus mode: fixed focus
Shooting mode
Automatic mode (P gear): EV adjustable,
ISO/Shutter automatic
Manual mode (M gear): ISO/Shutter
adjustable, EV not adjustable
Shutter priority (S file): Shutter/EV
adjustable, ISO automatic
ISO range
Video: ISO100 ~ ISO3200
Photo: ISO100 ~ ISO3200
Shutter speed
Photo Mode: 1/8000 ~ 8s
Other: 1/8000 ~ 1/frame rates
Portrait blur
Real-time image transmission portrait blur
and photo portrait blur
Defog mode
Support
Zoom range
Digital zoom: 1 ~ 16 times