Owner's Manual

5.2 Flight preparation
5.2.1 Battery preparation
1. Install aircraft battery
Turn off the battery power switch before installing battery, and insert the battery into battery
compartment.
2. Charge aircraft battery and remote controller
1) Charge aircraft battery
Insert one end of the charging cable into the USB-C charging port at the rear of the aircraft, and
connect the other end to the power adapter (rated power 30W)
2) Charge remote controller
Insert one end of the charging cable into the USB-C charging port at the bottom of the remote
controller, and connect the other end to a AC power supply through the power adapter (rated
power 30W).
Important
It is recommended to use the official charging cable and power adapter.