Owner's Manual
Table Of Contents
- User Manual
- Table of contents
- Data Storage and Use
- Chapter 1 Read Instructions
- Chapter 2 Aircraft
- Chapter 3 Remote controller
- Chapter 4 Autel Sky App
- Chapter 5 Flight
- Chapter 6 Maintenance and service
- Chapter 7 Technical Specification
- Quick Start Guide
- Multi-channel Charger Guidelines
- Battery Safe Operation Guidelines
- Disclaimer and Safety Operation Guidelines
Additional Features
The following features protect and extend battery life.
• Storage self-discharge protection:If the battery is stored in a
hot environment or not used for 6 days and the charge level
is high, the self-discharge protection will be activated. The
battery will be automatically discharged to a safe level. This is
the default setting, and the discharge process takes 2-3 days.
Although the battery does not indicate during the self-discharge
cycle, you may notice a slight warming of the battery, which is normal.
• Low power protection.If the battery is low, it will automatically
enter sleep mode to prevent over-discharge. In this mode, the
battery does not respond when the power button is pressed.
To wake up the battery, connect it to the charger.
• Charging temperature detection.If the temperature is below
5℃(41℉) or above 45℃(113℉) when charging, the battery will
stop charging.
• Overcurrent protection.When the charging current is too high,
the battery will stop charging.
• Overcharge protection.Charging will stop automatically when
the battery is fully charged.
• Balance protection.The voltage of each battery cell is balanced
to prevent overcharging or over-discharging.
• Over-discharge protection.When the battery is not in use, it
will automatically disconnect the power output function after
the self-discharge cycle is completed. This function is disabled
during flight.
• Short circuit protection.Once a short circuit is detected, the
power will be cut off.
• Power saving mode.If there is no operation for 30 minutes, the
battery will turn off.
5