Owner's Manual

5.2 Flight preparation
5.2.1 Battery preparation
1. Install aircraft battery
Turn off the battery power switch before installing battery, and insert the battery into battery
compartment.
2. Charge aircraft battery and remote controller
1) Charge aircraft battery
Press and hold the disconnect button on both sides of the battery, insert one end of the
charging cable into the battery charging slot, and connect the other end to the AC power
supply through the power adapter (rated power 63.75W).
2) Charge remote controller
Insert one end of the charging cable into the USB-C charging port at the bottom of the remote
controller, and connect the other end to the AC power supply through the power adapter (rated
power 63.75W).