EVO Lite Series User Manual

The gimbal includes two working modes:
Stabilization mode
The rolling axis remains horizontal while the pitching axis remains the user-defined angle.
This mode is used to capture stable image and video.
FPV mode
The rolling axis remains consistent with the rolling direction of the aircraft while the pitching
axis remains the user-defined angle. This mode is used for first-person perspective.
Important
 EVO Lite series camera gimbal is fixed by one gimbal protective cover that can protect
the gimbal from accidental rotation or damage during storage.
 In order to ensure normal operation, the gimbal temperature must be -10°C~50°C
(14°F~122°F).

Please be sure to take down the gimbal protective cover before startup. Otherwise the
gimbal camera and circuit may be damaged.

When turning on the aircraft power switch, the gimbal will rotate automatically to carry
out self-test and calibration. Please ensure that there is no object that may hinder the
gimbal motion around the gimbal.
 The gimbal contains precision components. In the case of collision or damage, the
precision components may be damaged to cause performance reduction of the gimbal.
Please protect the gimbal camera from physical damage.

The gimbal shall be kept clean and avoided touching sand, stone and other objects,
otherwise the gimbal motion may be hindered, affecting its performance.
 Never add any object on the camera gimbal, otherwise this may affect the gimbal
performance and even cause the motor burnout.
 Before flight, ensure that there is no any sticker or foreign object on the gimbal, and
place the aircraft on the flat and open ground. Never collide with the gimbal after power
on.

If any ground object collides with the gimbal or the gimbal is impacted by an excessive
external force (such as being collided or broken) when it is placed on the rugged ground
or grassland, the gimbal motor may become abnormal.
 The flight in heavy fog or cloud may cause the condensation of gimbal, resulting in
temporary fault. In this case, the gimbal can recover normal after drying.