Owner's Manual

3. If the Smart Controller antennas are damaged, it will affect the performance,
please contact the after-sales technical support immediately.
4. If the aircraft is changed, it needs to be repaired before using.
5. Make sure to turn off the aircraft power before turning off the remote
controller each time.
6. When not in use, make sure to fully charge the smart controller every
three months. •
7. Once the power of the smart controller is less than 10 %, please charge it
to prevent an over-discharge error. This is caused by the long-term
storage with a low battery charge. When the smart controller will not be
in use for an extended time, discharge the battery between 40%-60%
before storage.
8. Do not block the vent of the Smart Controller to prevent overheating and
diminished performance.
9. Do not disassemble the smart controller. If any parts of the controller are
damaged, contact Autel Robotics After-Sale Support.
4. AUTEL SMART CONTROLLER
The Autel Smart Controller can be used with any supported aircraft, and it
provides a high-definition real time image transmission and it can control the
aircraft and camera up to 13km (8.08 miles) [1) communication distance. The
Smart Controller has a built-in 7.9-inch 2048x1536 ultra-high-definition,
ultra-bright screen with a maximum 2000nit brightness. It provides clear
image display under the bright sunlight. With its convenient, built-in 128G
memory it can store your photos and videos on board. The operating time is
about 4.5 hours when the battery is fully charged and the screen is at 50%
brightness t
2
1.
5. ITEM LIST
NO DIAGRAM ITEM NAME
QTY
1
•
□
•
7.9 inch Smart
lPC
• •
Remote Controller
2