QUICK START GUIDE Autel Smart Controller AUTEL ROBOTICS
Contents 1. Disclaimer ................................................................ 1 2. Battery Safety ................................................................ 1 3. Precautions ................................................................ 1 4. Getting To Know the Autel Smart Controller ..................................... 2 5. Item List ................................................................ 2 6. Controller Layout .......................................... ................
1. DISCLAIMER To ensure safe and successful operation of your Autel smart remote controller, please strictly follow the operating instructions and steps in this guide. If the user does not abide by the safety operation instructions, Autel Robotics will not be responsible for any product damage or loss in use, whether direct or indirect, legal, special, accident or economic loss (including but not limited to loss of profit), and does not provide warranty service.
3. If the Smart Controller antennas are damaged, it will affect the performance, please contact the after-sales technical support immediately. 4. If the aircraft is changed, it needs to be repaired before using. 5. Make sure to turn off the aircraft power before turning off the remote controller each time. 6. When not in use, make sure to fully charge the smart controller every three months. • 7. Once the power of the smart controller is less than 10%, please charge it to prevent an over-discharge error.
2 3 4 IT 001] Smart Controller Protective Case 0 u lPC A/C adapter lPC USB Type-C cable lPC ,.==~ ~ 5 Chest Strap ~ 6 ,t 7 ~ Spare Command Sticks Documentation (Quick Start Guide) lPC 2PCS lPC [1] Fly in an open , unobstructed, electromagnetic interference-free environment. The smart controller can reach the maximum communication distance under FCC standards. Actual distance may be less based on the local flight environment.
. CONTROLLER LAYOUT Top view 1. Left Command Stick 5. Air outlet 2. Gimbal Pitch Angle Wheel 6. HDMI Port 3. Video Recording Button 4. Customizable Button C1 7. USB TYPE-C Port 8. USB TYPE-A Port 9. Power Button 11 . Photo Shutter Button 12. • Zoom Control Wheel 13. Right Command Stick 10. Customizable Button C2 *The function may alter, please take the practical effect as standard. 151---- - - +1 16 Front view 14. Battery Indicator 15. Antenna 16. Touch Screen 17. Pause Button 18.
• 4t -- - - Rear view 20. Speaker hole 21 . Tripod Mount Hole 22. Air Vent 23. Bottom Hook 24. Grips 7. POWER ON THE SMART CONTROLLER 7.
7.2 Powering on/off Press and hold the power button for 2 sec to turn on and off the Smart Controller. 7.3 Charging Remote Controller indication light status (I 0 0 0 (I I 0 (I I I 0 ) 3 lights solid on : Battery> 75% (I I I I ) 4 lights solid on : Battery > 100% pl NOTE: ) 0) 1 light solid on: Battery~ 25% 2 lights solid on : Battery> 50% I• LED indication light will blink while charging 8. ANTENNA ADJUSTMENT Unfold the Smart Controller antennas and adjust them to the optimal angle.
~ NOTE: LED indicator will flash while charging • Do not use other communication equipment which has the same frequency band at the same time, to avoid the interference to the Smart Controller signal. • During operation, the Autel Explorer app, will prompt the user when the image transmission signal is poor. Adjust the antenna angles according to the prompts to ensure the Smart Controller and aircraft have the best communication range. 100° 9.
. FLIGHT Open the Autel Explorer app and enter the flight interface. Before takeoff, place the aircraft on a flat and level surface and face the rear side of the aircraft towards you .
& NOTE: Before takeoff, place the aircraft on a flat and level surface and face the rear side of the aircraft towards you. Mode 2 is the default control mode of the Smart Controller. During the flight, you can use the left stick to control the flight altitude and direction, and use the right stick to control the forward, backward, left and right directions of the aircraft. ~ NOTE: • Please make sure that the Smart Controller has successfully matched with the aircraft.
Right Command Stick Left Side Veiw Left Side Ve,w ◄······· Backward ······ ► Forward Nose Forward @ ) Rear Vtew Rear Vtew ◄ · ·•··· Right ··· • ··► Left :;f :i_o oJ::}F · ·--S Move Right Move Lett @ 12. Specifications Image Transmission Max Signal Transmission Distance (No interference, No obstacles) FCC: 13 km CE / MIC: 7 km SRRC : 7 km Digital transmission Working Frequency 5.725 - 5.755 GHz Wi-Fi Protocol Wi-Fi Direct, Wi-Fi Display, 802.
* Working Frequency 2.400 - 2.4835 GHz ; 5.150 - 5.250GHz; 5.650 - 5.755GHz ; 5.725 - 5.850 GHz Other Specifications Battery Name: Intelligent Li-ion battery Capacity : 5800mAh Voltage : 11 .55V Battery Type : Li-ion Battery Energy : 67 Wh Charging time : 120 min Operating Hours - 3h (Max Brightness) - 4.
~ NOTE: • When external devices are connected and powered by the remote controller, the battery life may be reduced. • The working frequency band varies according to different countries and models. "* We will support more Autel Robotics aircraft in the future, please visit our official website https://www.autelrobotics.com/ for the latest information.
WWW.AUTELROBOTlCS.COM C 2020-2021 Autel Robotics Co., Ltd.
