User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Diagnostics
- 5 Service
- 6 TPMS
- 7 Data Manager
- 8 Settings
- 9 Update
- 10 VCI Manager
- 11 Shop Manager
- 12 Academy
- 13 Remote Desk
- 14 MaxiFix
- 15 Support
- 16 Quick Link
- 17 Function Viewer
- 18 Maintenance and Service
- 19 Compliance Information
- 20 Warranty
81
Figure 6-8 Sample Check Screen
The sensor position, sensor ID, tire pressure, tire temperature, sensor
frequency and sensor battery information of the triggered sensor will be
displayed on the right table of the screen.
Table 6-1 Possible Results for Triggering
Icon
Results
Description
(Green)
Successful
Sensor Read
TPMS sensor is successfully
activated and decoded. The table
on the right side of the screen
displays the sensor information.
(Green)
Successful
Sensor Read &
Low Battery
TPMS sensor is successfully
activated and decoded and the
battery level of the sensor is low.
(Red)
Failed Sensor
Read
If the search period expires and no
sensor is activated or decoded,
the sensor may be mounted
incorrectly or cannot function. The
table on the right side of the
screen displays “Failed”.
If a sensor with a duplicate ID has
been read, the screen displays a
message “Sensor ID duplicated”.
In this case, repeat the test
procedure.