User's Manual
Table Of Contents
- Trademarks
- Copyright Information
- Disclaimer of Warranties and Limitation of Liabilities
- For Services and Support
- Safety Information
- Safety Messages
- Safety Instructions
- 1 Using This Manual
- 2 General Introduction
- 3 Getting Started
- 4 Diagnostics
- 5 Service
- 6 TPMS
- 7 Data Manager
- 8 Settings
- 9 Update
- 10 VCI Manager
- 11 Shop Manager
- 12 Academy
- 13 Remote Desk
- 14 MaxiFix
- 15 Support
- 16 Quick Link
- 17 Function Viewer
- 18 Maintenance and Service
- 19 Compliance Information
- 20 Warranty
22
3. Automatic Selection
4. Manual Selection
Auto VIN Scan
The MaxiCheck diagnostic system features the latest VIN-based Auto VIN
Scan function to identify vehicles in just one touch, which allows the
technician to quickly detect vehicles, scan all the diagnosable ECUs on
every vehicle and run diagnostics on the selected system.
To perform Auto VIN Scan
1. Tap the Diagnostics application button from the MaxiCheck Job
Menu. The Vehicle Menu displays.
2. Tap the VIN Scan button on the top toolbar to open the dropdown
list.
3. Select Auto Detect. Once the test vehicle is successfully identified,
the screen will show you the vehicle VIN, tap OK at the bottom
right to firm. If the VIN does not match with the test vehicle’s VIN,
enter VIN manually or tap Read to acquire VIN again.
Figure 4-2 Sample Auto VIN Screen